WCC助焊劑NICROBRAZ S-BINDER介紹
Description:
Nicrobraz ‘S’ Binder is a water-based gel suspending agent which can be mixed with any Brazing Filler Metal powder to produce a thixotropic paste. These pastes are suitable for filler metal application with commercially available hand- and air-powered pressure activated applicators. Nicrobraz ‘S’ Binder acts as both a vehicle and a binder. When applied properly, it will hold the Brazing Filler Metal in place even after the Binder completely volatilizes at approximately 1000°F (540°C).
Nicrobraz ‘S’ Binder does not adversely affect high-purity dry atmospheres or vacuum, even though some outgassing occurs. The amount of outgassing will increase in proportion to the amount of Nicrobraz ‘S’ Binder used and the number of parts in the furnace. Outgassing can be reduced by airbaking prior to furnace processing. However, this is seldom necessary as air drying at room temperature is normally sufficient. (Allow 4-8 hours for complete drying.) A part should not be placed in the furnace immediately after filler metal is applied because the wet binder may expand too fast when heated very rapidly. This could cause the filler metal to spread over a wider area than desired.
Nicrobraz ‘S’ Binder contains no solvents and ozone depletion contents. It is non-flammable, non-toxic, and odor-free.
Form Available:
Bulk liquid: 1-liter and 4-liter containers.
描述：
Nicrobraz ‘S’ Binder 是一種水基凝膠懸浮劑，可與任何釬焊填充金屬粉末混合，制成觸變糊劑。這些漿料適用于使用市售的手動和氣動壓力激活涂敷器進行填充金屬涂敷。 Nicrobraz ‘S’ Binder 既可用作載體，又可用作粘合劑。如果應用得當，即使在粘合劑在大約 1000°F (540°C) 下完全揮發后，它也會將釬焊填充金屬固定到位。
Nicrobraz ‘S’ Binder 不會對高純度干燥氣氛或真空產生不利影響，即使會發生一些脫氣。脫氣量將與 Nicrobraz ‘S’ Binder 使用量和爐內零件數量成比例增加。脫氣可以通過在爐加工之前進行空氣烘烤來減少。然而，這很少是必要的，因為在室溫下空氣干燥通常就足夠了。 （完全干燥需要 4-8 小時。）在應用填充金屬后，不應立即將部件放入爐中，因為濕粘合劑在快速加熱時可能膨脹過快。這可能導致填充金屬散布在比預期更寬的區域上。
Nicrobraz ‘S’ Binder 不含溶劑和臭氧消耗成分。它不易燃、無毒、無異味。
可用表格：
散裝液體：1 升和 4 升容器。
WCC助焊劑其他常見型號：
WCC NICROBRAZ S-BINDER
WCC Flux NEW + ORIGINAL+ ONE YEAR WARRANTY
愛澤工業成立于2010年，定位于向先進制造工業提供高端制造技術和設備。代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。
如果有任何關于WCC助焊劑NICROBRAZ S-BINDER的疑問，請隨時與我們電聯，（021-3100 6702），我們將盡全力解決您的問題。
If you have any question for WCC products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.jjxdch.cn.
WCC助焊劑NICROBRAZ S-BINDER介紹說明
滬公網安備31011002006738號